Auto Services Posts

Toyota Hilux – Clutching It Rightly! 

The car performance is revved up by incorporating and enhancing on to its clutching system, similar is the case with Toyota Hilux. It is up to the usage of the drive which determines the need of clutch kit and other modifications required in your car to reach on to the desired level of speed and performance power. Considering this, the first thing you do before randomly updating the clutch kit of your car is to figure out where and how would you intend to use it, are you in for the adventurous treks or rough drives or is it just for the routine use. One of the greatest determinants of car clutches in knowing how do you intend to use your car. Then on the second spot comes the knowledge about cars, its parts and clutches, the more you equip yourself about the information on these touchpoints, the better you would be in selecting, choosing and replacing the clutching system of your Toyota Hilux. This knowledge factor comes very handy in Australia especially if you are a sporty person. 

As not every Toyota user could be well versed about the technicalities of its clutches and other parts therefore below are given a few basic ways to know more about it in order to be in a better decisive position, when the time comes.  

  • Toyota Hilux HD clutch like any other clutching system have discs on it, few come in circular discs while others could have puck style form. Both serve the same purpose but later one, dissipate the heat faster to the desired level as compared to its counterpart. Though, this type of disc could wear out easily and quickly; could be a little noisy too but racers prefer to opt out for it in order to feel the thrill of it.
  • The amount of power you need your Toyota to demonstrate is dependent upon the number of disc layers you are going to use in your HD clutch Australia. There’s a specific term of two-plate or three-plate clutches in the high-performance car community of Australia. Know that the more discs your clutch have, the more surface area it will use by generating more friction and handling more torque. It would also vibrate more and be noisy as well but then again, works great for the adventurous and racy tracks. Multi-disc performance clutches tend to be pricier and difficult to engage when the route changes to the regular road with traffic on them. So like mentioned earlier, your frequency of common use is a great determinant here.

Types of Clutches 

There are various types of clutch upgrades and modifiers available in Australia. It is, however, necessary to know about them beforehand.

  1. Organic Clutches – the common type which is used by manufacturers generally. These steel-based systems tend to be durable, easy to manage and forgiving on the roads. Though they heat up faster and could not keep up with too much torque but works fine for beginners
  2. Ceramic Clutches – more power-driven, harder and work fine in higher temperature. They could be very noisy due to the harder approach towards managing the heat, power, and temperature. They tend to engage faster when in operation, therefore, you require experience of handling them in high-pressure situations of Toyota Hilux HD clutch.
  3. Segmented Ceramic Clutches – combining the features of both puck style and full circular disc capabilities. They tend to be round or full disc in shape but with gaps in between; hence, giving you the power and control both at the same time. These are commonly used to derive high performance from Toyota Hilux clutch kits in Australia.
  4. Sintered Clutches – commonly used for drag racing and formula racing. The material has iron in it, making it capable to endure the melting point of temperature, handle more torque and friction. They turn on through an easy on/off switch and result into demonstrating more acceleration and power.

Lastly, it is also imperative to have a go at the capabilities of clutches for your Toyota Hilux before getting your hands on to it. One should know that knowing about car clutching systems is a whole lot of science that requires deep digging. It is, therefore, always better to deal with the experts of both Toyota cars and the clutching systems in order to prep your machine in the best way for the best outcomes while hitting the roads in Australia.

Handy Steps To Take Before Tinting Your Car’s Windows

Window tinting means coating the car’s windows with laminates of such physical and chemical qualities that reduce penetration of visible light and ultraviolet (UV) rays into the interior of your car, making driving comfortable even during the hottest days of the year. However, you must take some precautionary measures before you apply the tint so as to avail its added benefits, such as efficient energy consumption, much less load on the air conditioner, protected upholstery, resistance to scratches, increased privacy and security, and safety from glass breakage. The phrase ‘precautionary measures’ need not frighten you. These are little, albeit effective, steps that will make the tinting last way longer than it is generally known. Before you prepare your car for the window tinting process, cleaning the surface of the windows with liquid soap, mild cleaning agents or simply detergent will surely go a long way in proving your decision worth a while. Moreover, once the tinting is done, avoid taking your car under the direct reach of the sun as it will weaken the adhesiveness of the delicate films.  Now let’s have a holistic look at the necessary steps you need to take before and after having your vehicle’s windows tinted: 

Pre-wash your car 

We wash our cars all the time, except when we really need to be doing that. Often, when an unwashed car receives tinting treatment, it doesn’t take it well and the screens begin to fade away as tints’ hold on them becomes weaker. Therefore, it is recommended that you must wash your vehicle two to three days before your appointment with window tinting professionals.  

Avoid rolling the windows down 

Depending on the thickness of the shades, that ranges between .001 and .004 inches, and on weather conditions, your new window film may take two to three weeks to fully dry. Until this time, your new windows might also seem hazy or lumpy, and water bubbles might well be sending chills down your spine. But this is normal. Indeed, patience is the key here and you would do well not to roll your tinted windows down for at least three days.  

Use an ammonia-free cleaner 

Ammonia eats away the tint over time, so make sure to use an ammonia-free cleaning agent while polishing your car’s newly shaded windows. Also, avoid cleaning windows with abrasive cleaners and pads. Instead, use a sleek and soft piece of cloth, smooth paper towels or a clean synthetic sponge.  


In rainy towns like window tinting Penrith process becomes a little longer. More often than not, it is not possible to make all the water and bubbles go away from between the screens and the tints. It always takes some time to get dried up completely and it depends entirely upon the outside weather condition. If it is overcast out there, the drying process will take a bit longer and in case it is hot and sunny, the windows will be all dried up pretty quickly.  


After the windows of your car are adorned by virtue of tinting, you’d have to patiently wait for two days before you can clean it. Because of peculiar weather conditions, window tinting in Penrith might involve a risk of pulling the window tint loose before it gets dried up. The windows will be lightly wiped just after your car is tinted, but it will require proper cleaning later on. For the tinting to last long, you must maintain it without any extra pressure on it, and, as stated before, instead of using any chemical agents like ammonia you can simply clean the tints with a moist cloth to keep them fresh and long-lasting. 

Watch out for seatbelts! 

Caution should be used when releasing seat belts as small chips can pop up in the window film due to the seat belt hitting the glass as it is released. Remember, this will not be covered under the warranty. In order to avoid such scenario, we advise you to gently release the seat belts. Small metal rubs or silvery looking spots can be spotted in some vehicles. These spots are formed if any metallic object like the handle of the baby stroller gets rubbed against the window pane. Usually, these metal spots are not discernable, but when the glass gets tinted, these spots could be seen very clearly.